Solar Screen Installation

80% density blocks 80% of sunlight and heat while maintaining good outward visibility. 90% is recommended for south and west-facing windows where heat gain is highest, the slight reduction in visibility is worth the extra heat protection in our climate. 95% is used where maximum heat block matters more than visibility, like garage windows or utility rooms.

Yes. 80% density allows roughly 20% of light through, rooms will be noticeably dimmer. 90% density allows about 10% through, and 95% allows very little. Most homeowners use 80% on windows they value for natural light and 90% on heavily sun-exposed windows. We'll discuss your priorities during the measure.

Yes, from inside looking out, visibility is good with 80% and adequate with 90% density. From outside looking in, solar screens provide significant privacy during daylight hours, you can't easily see through them from outside when it's brighter outdoors than indoors.

Quality solar screen material in our UV environment typically lasts 8–12 years before the material begins to degrade and lose its heat-blocking effectiveness. The aluminum frames last indefinitely. When the material reaches end of life, we can re-screen the original frames at lower cost than full replacement.